Product details
Model Number: UL400/W
Brand Name: Eoutil
Key Specifications/Special Features:
UL400 4 In 1 Distance Metal AC Live Wire Stud Finder Ultrasonic Distance MeasuresOperation environment:Operation temperature: 32℉ to 104℉(0℃ to 40℃)Still air and hard target surface for accurate measurement.The tool always measures from the base of the tool.Important note:
For long distance measuring between 40 FT to 50 FT(12M to 15M),the relative humidity should be above 48％ and target size of at least 10 ft by 10 sq ft /3M BY 3M.
POWER SUPPLY
The tools require one 9 volt battery to operate.
BATTERY INSTALLATION
1. Open battery door on back of case.
2. Connect a 9-volt battery to battery clip.
3. Insert battery into case and replace battery door.
When battery is low, the low battery icon will be continuously displayed on the LCD.
How to use the ultrasonic distance meter
Point to wall and get measured distance by press ”Read”.
For dynamic read, press and hold “Read” key to get measured distance displayed while the unit is moving.
Each measurement erases the previous one.
Measured distance is displayed on top of the LCD screen.
Unit automatically turns itself off after 30 seconds of inactivity.
IMPORTANT NOTE:
Position and point the unit perpendicular to the target.The laser pointer will show where the tool is pointing and is only on while a reading is being taken.
The target must be a hard regular surface unencumbered by objects/obstacles in the measurement field.
For more accurate result, choose a target that is flat and large with hard surfaces.
Put a piece of cardboard in front of the target if the measured target is small, irregular or soft.
The ultrasonic distance meter cannot measure through glass, but will measure TO glass.
Addition (w/o using Mem)
Press “Read” for measurement.
press “+/=” to enter the addition mode. A “+”icon will appear on LCD.
Press and hold “Read” again for second measurement.
Press “+/=” again the sum is shown on the bottomAddition (using Mem):
Press “Mem input” to save the desired measurement for the additiom
Press “Read” for new measurement.
After getting the new measurement, press“+/=” to enter the addition mode .A “+”icon will appear on LCD.
Press “MEM Recall” to recall previous measurement for the addition. The“MEM” icon will disappear and the stored memory will be automatically cleared.
Press“+/=”again, the sum is shown in the bottom.
For long distance measuring between 40 FT to 50 FT(12M to 15M),the relative humidity should be above 48％ and target size of at least 10 ft by 10 sq ft /3M BY 3M.
POWER SUPPLY
The tools require one 9 volt battery to operate.
BATTERY INSTALLATION
1. Open battery door on back of case.
2. Connect a 9-volt battery to battery clip.
3. Insert battery into case and replace battery door.
When battery is low, the low battery icon will be continuously displayed on the LCD.
How to use the ultrasonic distance meter
Point to wall and get measured distance by press ”Read”.
For dynamic read, press and hold “Read” key to get measured distance displayed while the unit is moving.
Each measurement erases the previous one.
Measured distance is displayed on top of the LCD screen.
Unit automatically turns itself off after 30 seconds of inactivity.
IMPORTANT NOTE:
Position and point the unit perpendicular to the target.The laser pointer will show where the tool is pointing and is only on while a reading is being taken.
The target must be a hard regular surface unencumbered by objects/obstacles in the measurement field.
For more accurate result, choose a target that is flat and large with hard surfaces.
Put a piece of cardboard in front of the target if the measured target is small, irregular or soft.
The ultrasonic distance meter cannot measure through glass, but will measure TO glass.
Addition (w/o using Mem)
Press “Read” for measurement.
press “+/=” to enter the addition mode. A “+”icon will appear on LCD.
Press and hold “Read” again for second measurement.
Press “+/=” again the sum is shown on the bottomAddition (using Mem):
Press “Mem input” to save the desired measurement for the additiom
Press “Read” for new measurement.
After getting the new measurement, press“+/=” to enter the addition mode .A “+”icon will appear on LCD.
Press “MEM Recall” to recall previous measurement for the addition. The“MEM” icon will disappear and the stored memory will be automatically cleared.
Press“+/=”again, the sum is shown in the bottom.
Shipping Information:
- FOB Port: Fuzhou
- Lead Time: 40 - 50 days
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe
